How to Reduce Your saab 9-3 key fob programming Key Replacement Cost
You can save a significant amount of money if you get your spare key before you lose your previous one. It’s typically 2X-10X more expensive to originate a new key if you’re only left with one.
It’s simple, inexpensive and easy to change the battery in your SAAB 9-3 remote. Here’s how.
Cost of Replacement Key
The 03-11 SAAB 9-3 is a great car however its ignition key can be susceptible to wearing down. The case can get sticky and the buttons are known to fall out, and this can be a huge hassle when you’re driving. This is why it’s recommended to replace the key fob as quickly as you notice any problems. This will save you money over the long term, and is far better than putting off the replacement.
You can replace a SAAB’s keys fob yourself for less than $100. You’ll have to purchase an additional key fob shell that will work with your vehicle, and a new battery. To replace the battery, you’ll have to carefully remove the electronic components of your SAAB 9-3 keyfob. Once you’ve done this you can simply insert the new battery and then resynchronize the key fob with your vehicle.
SAAB keys with the remote start feature require special attention since they feature an embedded transponder chip that needs to be programmed for your specific vehicle. You’ll require the dealer-grade Tech 2 tool or its equivalent for your Saab model to accomplish this. The tool will read the code on the keys you have and use this information to program your new key. This procedure can be more complicated and will cost you up to $500 if you do not already have an extra.
It is recommended to find locksmiths who work with Saabs. These experts will be able to make you a new key at an affordable cost compared to the dealer. They can also do other services, such as key duplication and replacement, so you’ll be able to have a spare car key in the event that yours gets damaged or lost.
Most European automobiles manufactured after 2000 have immobilizer systems, which depend on a microchip that is built into the key to begin and recognize your car. This is the reason why these types of keys tend to be more expensive to duplicate than keys that do not have a chip. However, there are exceptions. For example, VATS keys (which are mechanical but contain a small resistor value inside) do not require programming and are relatively inexpensive to duplicate. The majority of BMWs, Mercedes and Porsches produced after 2000 will require a dealer for key duplicates. This is because these manufacturers don’t allow their dealers to join NASTF, which is the organization that creates the tools other automotive locksmiths make keys to replace for their customers.
Cost of a New Remote
If you have a Saab car that features keys-less entry systems, it is important to have a spare remote or key. You can use it in the event that your original key is lost or damaged. If you have insurance that covers key accessories, it can lower the cost of replacing a remote.
The majority of car keys made after 2000 can be programmed by a dealer or locksmith. The majority of these keys are stored in a tiny EEPROM chip that can only be read by an appropriate computer designed for that purpose. This means that if you need a new key for your vehicle, you have to visit the dealer. The good thing is that the dealer will cost you less than a locksmith.
Saab 9-3s are beautiful cars and a large number of are still in use in the present. But, there’s a major issue with these cars and it’s their ignition key. The key is very small and doesn’t have a very appealing design and is known to lose its grip or get stuck easily. Many people have found themselves without a functioning key within a few years after purchasing their car.
It’s easy to get an additional key for your SAAB. The first thing to do is to remove the emergency key from the saab 9 3 key replacement 9-3. It’s a simple procedure that you can do yourself, and it does not require any tools at all. You should be cautious though, as if you press it too hard you could damage the electronic components.
The next step is to find a place where you can buy an OEM replacement saab Car keys key case for your saab ignition key. They can be difficult to come by, but If you know where to look, you are likely to find one easily. Once you have found a replacement key case, you’ll need to have it cut and programmed to your vehicle.
It’s not cheap to get a new SAAB key however, the expense is worth it. It’s less expensive than having to replace your entire vehicle and it will save you a lot of time. So if you’re down to one key that works, it’s best to get it replaced as soon as possible. You don’t know when you’re likely to lose it and this could result in lots of frustration and expense.
