Add Warmth to Your Home With a Fireplace Wall Mount
Add ambiance and warmth to your home, office or commercial space with a fireplace wall mount. These units are easy to install, and they include mounting brackets that can be used for hanging or recessing into walls.
For a simple and quick installation, follow the directions on the website of the manufacturer. Verify that the wall-mounting bracket and the bottom of the fireplace are able to fit together, then secure it to the wall.
Size
A wall-mounted electric fireplace can be an amazing focal point to a room, creating ambiance and warmth. These units come in a variety of sizes that can fit in spaces. A smaller model is perfect for a bedroom, while a larger one can be put in a living or family room. Some models offer the option of recessed installation against the wall to create an elegant look.
The height of the fireplace wall mount can also influence the way it appears within the room. To create a dramatic effect some people opt to place them higher on the wall, typically 6 to 12 inches above the ground. Others prefer to mount them at the normal TV height of 4.5 to 5 feet that lets the fire be seen from a variety of seating positions in the room.
Regardless of the size you choose regardless of the size you choose, there are a few important factors to consider to ensure that your fireplace is safe and efficient. For instance, you should make sure that all combustible things are kept at a minimum of three feet away from the fire including furniture and drapes. If you can, also attach the mounting brackets to the studs. If you cannot locate studs, use anchors made of plastic to ensure your fireplace will not be removed.
When choosing a fireplace mount, it is important to consider the amount of heat it creates. It is recommended to select a model which produces approximately the same amount as an average electric heater. This will ensure that your fireplace will provide sufficient heat for the entire room.
Some fireplaces have unique features that distinguish them from other fireplaces. For instance, some fireplaces come with remote control with adjustable brightness settings and no-heat modes. They also have cool-to-the touch glass and realistic LED flames. Other notable features include a convenient built-in shelf to store electronics and an easy installation procedure that doesn’t require any expert help.
Installation
Unlike a built-in electric fire that requires a hard-wired connection to the electrical system of your home, a fireplace wall mount is semi-permanent. It can be installed directly on a wall, or into a bracket that is then mounted to the wall. It is essential to choose an area that is close enough to an outlet that it will allow the power cord to reach it, while still allowing for sufficient clearance from nearby objects. This is in line with the manufacturer’s recommendations in the manual for your owner.
Before beginning the installation process, be sure that your fireplace is in good order by plugging it in and playing with its LED lights and heat settings. This will tell you if the fireplace is ready for installation or if further testing is required.
Make sure you have the area ready for in which you’ll install your fireplace mount. Depending on the model that you purchase, this might involve the installation of a bump on the wall or covering the existing wall with drywall. In the latter scenario ensure that you employ proper drywall techniques such as mudding and taping, and allow it to completely dry before proceeding.
After the walls have been prepared then secure the bracket to the wall using screws. The brackets should be screwed into the studs that are behind the drywall. This will help to prevent the fireplace from pulling loose from the wall later.
Once the bracket is secured, it’s time to install the fireplace itself. This can vary from model to model but generally, there is a ledge on which the fireplace will rest and a place to attach it to the brackets at the top. You can then put any additional media such as stones, embers, logs or a grate within the fireplace.
Some models allow you to attach the firebox and the screen to the wall bracket. This can make the installation even easier, but it is important to check that everything fits well and is secured prior to finishing.
Once the fireplace is placed it is possible to complete the look by tacking or screwing the bracket to the wall, and then trimming any wires that aren’t needed. If desired, you can also paint the wire covers to disguise the power cord.
Safety
A fireplace wall mount allows you to heat your home while saving valuable floor space. However, it is essential to be cautious when using this type of fireplace. To avoid electric shock, the first step is to make sure that the fireplace is grounded. Be sure to follow the instructions given by the manufacturer for proper usage.
While it is possible to find wall fires-mounted electric fires which don’t produce any heat, the majority have a heater to enhance the realistic and ambiance the flame effects. It’s usually an element of heating that is forced by a fan that blows air over the heating element. Some models also have an infrared heating source.
After the fireplace has been mounted, it is important to stay clear of touching the hot surface. This can cause burns or damage to the appliance. To reduce the risk of fire, keep combustibles at least three feet from the fireplace. Be careful not to block vents at the back of the fireplace.
There are additional safety features to look for when selecting an electric fireplace wall mount. For instance, check that the unit comes with an emergency shutoff switch to prevent fires or overheating. It is also a good option to select a model that has a low output of heat, since it will help you save energy.
The material used to surround is also important. Choose a material which is safe for pets and children like wood veneers, steel, or glass. You should also choose one with a display or a remote control to make it easier to operate.
There are many different kinds of ethanol and electric wall-mounted fireplaces. The best one for you will depend on your budget and the design of your home. You can be certain to bring warmth and class in your home, no matter if you choose an electric or ethanol fireplace. Always follow the safety instructions provided by the manufacturer and keep your pets and family members safe when using this fireplace.
Style
The style of a fireplace wall mount determines how it will look on the walls of your home. Some models are designed to stand out and others blend in with the décor of the room. For instance, a modern model like the Streamlined wall-mount electric fireplace features a sleek front glass face and a minimalist profile. It features top venting which allows heated air to flow freely while keeping the elegant design of the fireplace. Its flat mount and simple-to-use remote make it simple to operate.
There are also wall-mount electric fireplaces that feature more traditional-looking mantels. These wooden fireplaces are perfect for homes with existing open hearths or those looking to transform a firebox that is wood-burning into an electric fire fireplace without chimney. These flat-wall fireplaces are available in a variety of sizes, and they usually come with a shelf for display decorations. They’re an excellent choice for bedrooms, living rooms, and home offices.
Gas wall-mount fireplaces are also a excellent option for those looking to create a warm and welcoming atmosphere in their home. They are equipped with a traditional log set and are available in several frame styles such as natural stone and black. They also have an ember bed that can be customized and LED flame color options to give an individual touch. Some models come with an integrated TV mount for added functionality.
Some models are designed to be mounted directly onto the wall, while others can be recessed partially or completely into a wall. The Allusion wall-mount fireplace has a small footprint, which allows it to be recessed into 2×6 frame walls. But, you can put a trim skirt on the exposed area. The Allusion also comes with a convenient remote control as well as a variety of heating settings, so you can enjoy your fireplace throughout the year.
Surface-mounted electric fireplaces typically project 4″ to 6.5″ into the room, which makes them easier to install than models that are recessed into the wall or constructed out of a wall cavity. Renters will also be pleased with the ease of installation, as they don’t have to be concerned about drilling holes into their walls. When you move, you’ll be in a position to easily remove or reposition your fireplace.
